Rennology R2 Performance Package for Audi SQ5
Street car with aggressive power, quick response and louder exhaust tones
Rennology’s R2 Performance Package for the Audi SQ5 combines best of breed products to deliver a street car that is more fun, has aggressive power, is quicker to respond and sounds fast. We combine an APR stage 2 Dual Pulley Kit, an APR TCU upgrade with an AWE Non-resonated Touring Exhaust, an APR carbon intake and H&R Springs to deliver a fun car that maintains all the street driving characteristics of the Audi SQ5 but is happy to deliver quick, flat corners from a more aggressive, low stance.
Rennology R2 Performance Package for Audi SQ5 3.0T Features:
- 93 HP Gain
- 104 FT-LBS of Torque Gain
- Quicker Acceleration
- Flat Corner Handling
- Louder Exhaust Tones
- Rapid Gear Shifts
- Easy to maintain
APR Stage 2 Dual Pulley Upgrade for Audi SQ5
At the heart of the Rennology R2 Performance Package is a stage 2 Dual Pulley upgrade from APR. The ECU software upgrade and dual pulley combination produces a 93+ HP gain over stock and approx. 104 ft lbs of torque gain over the stock SQ5. Upgrading both the supercharger drive and crank pulleys results in the factory supercharger spinning approx. 26% faster than stock. This speed was chosen after extensive engine and chassis dyno testing by APR. This results in a significant bump in horsepower and torque across the entire RPM range. The APR engine performance software takes full advantage of the pulley modifications and makes more engine power by running more boost pressure, optimizing camshaft positions and timing, controlling valve lift actuation, adjusting the air/fuel ratio, and advancing ignition timing.
APR DL501 S Tronic TCU Upgrade
APR’s transmission software upgrade provides faster acceleration, quicker gear shifts combined with optimized shift points and smoother operation. The TCU upgrade also features launch control. When using launch control, the transmission enters a maximum acceleration mode designed to provide the fastest possible acceleration through a heightened application of torque, optimized shift points and shift strategies. Under wide-open throttle, the transmission enters a different state of performance with shift maps optimized for power delivery. Manual and Tiptronic mode are tailored to the driver’s desired auto up/down shift preferences at the time of install. However, under part-throttle daily-driving the transmission remains calm and smooth.
APR S Tronic Transmission Software Upgrade
SOUND LOUD & FAST
AWE Tuning Touring Exhaust - Non Resonated for Audi SQ5
AWE Tuning’s Touring Edition Exhaust is crafted of T304 stainless and delivers noticeable volume and power gains. There are no valves or control systems for the Touring Edition and this exhaust version is on the louder side all the time, with volume most pronounced in the mid rev range due to the non-resonated sections. A selection of tip sizes are available with the 102mm diamond black the preferred choice.
AWE Tuning Audi SQ5 Touring Edition Exhaust - Non Resonated
APR Carbon Air Intake For Audi SQ5 3.0T
The APR Carbon Fiber Intake System increases performance primarily by improving airflow through the system while still proving adequate filtration. You can expect increased horsepower and torque throughout the power band and a more responsive feel from the throttle. Sounds from the engine and turbocharger are also enhanced.
H&R Lowering Springs for Audi SQ5
H&R Springs are designed uniquely for each vehicle and offer the handling characteristics with an aggressive appearance of a lower stance. H&R Springs typically produce a comfortable ride without the harsh characteristics of less-advanced spring systems. The H&R Springs lower the Audi SQ5 by 1 inch in the front and by 0.8 inch in the rear for an aggressive look but comfortable ride.
MORE or LESS POWER?
Product Advice and Installation Services
Rennology Motor Sport supplies and installs a full line of quality, selected tuning & performance upgrades for European vehicles. We offer a full installation service for all of the products we supply and importantly, we can continue to support your Audi for factory scheduled maintenance and repair work after the tuning or upgrade parts have been installed.
It’s easy to bolt parts on – you can do that at home. When we modify a car, we make sure the car is easy to maintain, pleasurable to drive and reliable. Modifications should enhance your driving pleasure not become an unreliable pain. Call us for product advice and a guide to upgrades that will achieve your personal vehicle goals.